Ready for a new look for the dirt bike? Graphics kits can be a great way to change the look completely while saving money compared to painting it and adding on a bit more protection against scratches and scrapes. It is important, though, to know what to look for and how to apply the graphics to ensure the installation is done properly. Read below for tips on how to make sure it’s done right.
Plan Out the Design or Purchase a Kit
It is important to plan out the design carefully to make sure the bike looks perfect once it’s done. When buying a dirt bike graphics kit, it’s possible to purchase one that’s pre-made or get one that’s completely customized. With a customized kit, make sure to pick out the right colors and design elements to ensure the bike will look great. Take the time to choose a high-quality kit with the right look before moving on to the next step.
Prepare the Bike for the Installation
It is important to make sure the bike is properly prepared before installing the new graphics. The bike should be thoroughly cleaned and dried before the installation process begins. If there are existing graphics on the bike, it is a good idea to carefully remove them and clean the area under them. There are many ways to remove adhesive residue to help speed up this part of the process. One way is to heat up the graphics a little bit and use a tool to help pull them off carefully, then use the heat to help keep the adhesive soft so it’s easier to remove.
Work on Small Sections
When the bike is ready for the graphics to be added, it’s recommended to work on small sections at a time to minimize the potential for wrinkles or bubbles. Work carefully, ensuring the graphics are placed in the proper position and that they fit around the curves of the bike. A heat gun can be used to help mold the graphics to the bike so they fit properly and will stay long into the future.
Use a Heat Gun to Set Them in Place
A heat gun can also be used to help set the graphics in place. Use it to gently melt the adhesive so that it’s able to adhere to the bike better. Avoid overdoing this, though, to prevent damage to the bike or the graphics. Once the graphics are set, it’s recommended to let the bike sit in place for at least 24 hours. This allows the graphics to cool down and the adhesive to finish curing so they are adhered properly and will not peel or come off.
Proper Maintenance Keeps Them Looking Great
Remember to take care of the bike to ensure the graphics continue to look great for as long as possible. After going off-road, rinse the bike to remove any dirt or mud. Wash the bike regularly to make sure all components are cleaned and dry it carefully to prevent rust or other damage. Proper maintenance can help keep the bike running as long as possible, too.
Adding on new graphics can fully restore the look of your bike and help protect it from damage. If you’re ready to get started, take a look at the graphics kits available today to find the perfect one for your bike.
